Brake Pedal Angle Sensor
The Brake Pedal Angle Sensor implements the Hall sensor to detect the angle of the brake pedal position with high precision. The electronic accelerator pedal/brake pedal position can be measured with a specific mounting bracket and linkage mechanism.
Features
• Non-contact measurement
• Measurement range can be customized according to customer needs
• Proportional analog voltage, PWM output mode
• Support dual redundant output mode
Sensor Dimension
ICD Definition
PIN NO. |
Definition |
1 |
GND |
2 |
N/A |
3 |
N/A |
4 |
Output |
5 |
+5V |
6 |
N/A |
Performance Index
• Absolute Maximum Ratings
Storage Temperature Range |
-40℃ ~ 105℃ |
Operating Temperature Range |
-40℃ ~ 105℃ |
Relative Humidity |
< 95% (25℃) |
Seal Class |
IP6K9K |
• Output Characteristics (within the operating temperature range)
Supply Voltage |
5V±10% |
Current Draw |
15mA (Single); < 30mA (Dual) |
Sensor Output |
Analog or PWM |
Resolution |
0.1° |
Accuracy |
<= ±2° |
Update Rate |
< 4ms |
Zero Error |
< ±1° |
Matching Connector |
AMP 1-967616-1 |
Assembly Features (See mechanical drawings for details) |
Fixed at two points with M5 screw |
Rocker Length |
50mm |
Range of measurement |
<= 120° |
• Output Curve (Analog)
Installation
When measuring the position (angle) of the accelerator pedal and the brake pedal, the installation form is as shown below: